* fix: show resource counts for all side navigation items
The side navigation looks up the count of a nav item by its name, but the
counts are keyed by the K8s resource type. Many Harvester nav items are
named differently than the resource they list (e.g. harvesterhci.io.volume
lists persistentvolumeclaim), so no count was shown for them. Some list
views also show only a subset of their resource type, so the plain count
would not match the list.
Override the count getter of the harvester store:
- Resolve the nav item to the resource type it lists, using the same
fallback to the configureType resource as schemaFor. This fixes Hosts,
Alertmanager Configs, Cluster Flows, Cluster Outputs, Flows, Outputs
and Secrets.
- Count only the subset shown by the list for Volumes, VM Networks,
VM Backups, VM Snapshots, Volume Snapshots, Cloud Configuration
Templates and Storage. The matches are counted per namespace once per
store list using sharedComputed.
- Like the list views, do not count resources in system namespaces when
"All Namespaces" is selected.
Steve's counts endpoint only returns the total per resource type, so the
filtered counts are computed from the store list and are only available
once that list is loaded. Until then these nav items show no count, unless
there are no resources of that type at all (then 0). The dashboard loads
PVCs and networks, the VM list PVCs and backups, the other resources are
loaded when their list is opened.
Related to: https://github.com/harvester/harvester/issues/11984
Signed-off-by: Volker Theile <vtheile@suse.com>
* refactor: get the side navigation counts from the server
Stop loading full resource lists and filtering them in the browser to
get the side navigation counts.
- Nav items listing all resources of a type use the counts endpoint,
through the resource type of the nav item.
- VM backups, VM snapshots, volume snapshots, storage classes, cloud
config templates and VM networks request their subset from
/v1/harvester with a page size of 1. These requests run again when the
counts endpoint reports other numbers for the type, and when the
namespace filter changes.
- Namespaces count the already loaded namespaces that are neither system
nor Fleet managed.
- Volumes have no count: the list hides volumes that are only marked by
annotations, which the API cannot filter on.
Signed-off-by: Marcelo Fukumoto <marcelo.fukumoto@suse.com>
* refactor: keep the side navigation count helpers in the store getters
Move them out of their own file, next to the count getter that uses them.
Signed-off-by: Marcelo Fukumoto <marcelo.fukumoto@suse.com>
* fix: make the side navigation count requests more robust
- Ignore a late response of the previous cluster. Resetting the request
ids when loading a cluster let it overwrite the count of the new one.
- Keep the watchers when a cluster left while it was loading finishes
loading after the new one.
- Show no count instead of 0 on Harvester v1.3, which ignores the query
and sends all resources without a count.
- Hide the storage network by its generated name. Networks created
before Harvester v1.4 do not have the hash label, and an upgrade does
not add it.
- Stop refreshing after leaving the product, cancel pending refreshes
when the watchers stop, and cope with the store module being
unregistered when logging out.
Signed-off-by: Marcelo Fukumoto <marcelo.fukumoto@suse.com>
* fix: count only the settings the Settings page shows
The nav item showed the total of all Setting resources, but the page only
shows the allowed ones that exist in the cluster and are supported by its
version.
Move these rules into a visibleSettings getter that both the page and the
count use, so that they always agree. SettingList no longer needs its
feature flag check.
Signed-off-by: Marcelo Fukumoto <marcelo.fukumoto@suse.com>
* test: remove a Settings page test that was committed twice
Signed-off-by: Marcelo Fukumoto <marcelo.fukumoto@suse.com>
* fix: show the number of volumes in the side navigation
The Volumes list hides golden image volumes and the temporary volumes CDI
uses to populate a volume, so the total of the counts endpoint would be
wrong.
Golden image volumes are only marked by an annotation, which Harvester's
API cannot filter on, but each one belongs to a DataVolume owned by its VM
image. So request the volumes that are not owned by another volume, and
the DataVolumes owned by a VM image, and show the difference.
Every nav item with a list now has a number, so remove NO_COUNT.
Signed-off-by: Marcelo Fukumoto <marcelo.fukumoto@suse.com>
---------
Signed-off-by: Volker Theile <vtheile@suse.com>
Signed-off-by: Marcelo Fukumoto <marcelo.fukumoto@suse.com>
Co-authored-by: Marcelo Fukumoto <marcelo.fukumoto@suse.com>
* feat: add component health dashboard sections
Add health summary and component health tables with severity filters and expandable check details.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Signed-off-by: Jack Yu <jack.yu@suse.com>
* feat: use health API group for component health resources
Update dashboard resource types to use the health.harvesterhci.io API group.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Signed-off-by: Jack Yu <jack.yu@suse.com>
* feat: add component health ignore controls
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Signed-off-by: Jack Yu <jack.yu@suse.com>
* feat: gate component health behind the componentHealth feature flag
Only show the component health dashboard sections on Harvester v1.10.0 and later.
Signed-off-by: Jack Yu <jack.yu@suse.com>
* fix: address component health review comments
- sort the health summary table by a severity rank
- use buttons instead of anchors for restore and show more actions
- let the affected resources list expand so every resource can be restored
- widen the ignore popup and cap its height
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Signed-off-by: Jack Yu <jack.yu@suse.com>
* refactor: split component health into dedicated components
Move the health summary, component health tabs and ignore popup out of
the dashboard page into components/health, and share the constants and
helpers through utils/component-health.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Signed-off-by: Jack Yu <jack.yu@suse.com>
* fix: sort component health by severity rank
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Signed-off-by: Jack Yu <jack.yu@suse.com>
* fix: toggle health rows in place and tell empty filters from no checks
- toggle the expanded message and resource ids by mutating the unwrapped
arrays, the template does not pass refs
- show "No checks match the selected filters" when the severity filters
hide existing checks, keep "No issues detected" for a report without
checks
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Signed-off-by: Jack Yu <jack.yu@suse.com>
* refactor: fetch component health resources in their own components
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Signed-off-by: Jack Yu <jack.yu@suse.com>
* feat: move health into a Components tab with the checks as sub-rows
The dashboard showed the summary table, then side tabs with a second
table for each component. It is now one table in a new Components tab
next to the Events tabs: one row per component, which opens to its
checks. Rows start closed, and the component name is a button so the
keyboard can open them. The tab only shows when the addon's resources
exist.
The table's own filter box replaces the severity dropdown. It only looks
at the table's own rows and the checks are in the sub-rows, so the rows
give it the text of their checks, a row only shows the checks it found,
and the rows it found open.
Ignoring a check moves from a popover, which cut off its Reason field
and Ignore button, to an RcModal that starts over each time it opens.
Signed-off-by: Marcelo Fukumoto <marcelo.fukumoto@suse.com>
* refactor: use RcButton for the component health buttons
The Ignore modal's button already was one. This moves the rest of them,
the row's Ignore, Restore, the "show more" links and the component name,
off the global btn classes.
Signed-off-by: Marcelo Fukumoto <marcelo.fukumoto@suse.com>
* refactor: manage one ignore rule per check from the row's actions
A check now has one rule, reached through the table's action menu: create
it when the check has none, view, edit or delete it when it has one. View
and edit use the same modal as create. This replaces the Ignore button and
the Restore links, which could only delete a whole rule and said the check
was restored when it wasn't.
The modal's section titles were the radio group's h3, as big as the modal's
own title. They follow what rancher/dashboard does in its forms now.
The actions follow what the user may do. The rules are only loaded with
their schema, and a list that fails no longer empties the table.
Signed-off-by: Marcelo Fukumoto <marcelo.fukumoto@suse.com>
* refactor: let the tables filter by themselves and show resources as chips
The filter had logic of its own on top of the table's. The nested table now
filters its rows the way the outer one does, with what is typed in the box.
Rows no longer open by themselves, which is how the other tables with
sub-rows behave. Expand All and Collapse All are there instead, copied from
what the table has from shell 3.0.15.
Affected resources are chips under the name the UI has for their type, with
the usual counter badge and the API version beside it. Ignored resources are
outlined instead of filled, and the text of an ignored check is muted. The
links use the shell's wording.
The component rows lose Last Updated. The summary only has one time, for its
counts as a whole, so it said nothing about the component in the row. They say
Error instead of Critical, as the checks inside them do. The Node column goes,
as nothing sets its label.
The Components tab shows the number of errors as a badge, as nothing else on
the page tells there are any.
Signed-off-by: Marcelo Fukumoto <marcelo.fukumoto@suse.com>
* fix: name the ignore rule after its check and make its expiry clear
- Name the rule the UI makes after its check, so Kubernetes refuses a
second one for the same check. The row's menu only manages that rule.
- Show the rule's current expiry above the durations, and the new one
under them once a duration is chosen. Edit starts with none chosen,
Save stays off until something changes, and a warning says when an
expired rule would stay expired.
- Delete the rule through the shell's delete prompt, like every other
delete.
- Say which list could not be loaded, instead of showing it as empty.
- Keep the full count of affected resources, say how many ignored ones
are left out of the list, and count them on Show ignored.
- Drop the checks' Last Updated, which is the time of their whole report.
- Leave out the row menu when no check has an action.
- Mark the Components tab with the shell's alert icon when there are
errors, with their number in its tooltip, instead of a badge.
Signed-off-by: Marcelo Fukumoto <marcelo.fukumoto@suse.com>
---------
Signed-off-by: Jack Yu <jack.yu@suse.com>
Signed-off-by: Marcelo Fukumoto <marcelo.fukumoto@suse.com>
Co-authored-by: Jack Yu <jack.yu@suse.com>
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
Kube-OVN sets a subnet's VPC (ovn-cluster when none is given), but a
subnet it hasn't processed, such as one with an invalid provider, has
none. The VPC page grouped those under "Virtual Private Cloud:" with an
empty name, and its Create Subnet, Topology and actions buttons pointed
at no VPC.
Show None as the VPC name for that group and leave out its VPC buttons.
Signed-off-by: Marcelo Fukumoto <marcelo.fukumoto@suse.com>
* perf: speed up the VM list with many VMs
The VM list scanned whole store lists for every row and re-evaluated the same values per row on every render and sort. With several hundred VMs this blocked the browser on sorting and on every VM update.
Performance:
- look up launcher pods and migrations through shared indexes (namespace/name -> resource) instead of scanning per row; the indexes are computed per store list, so they stay in sync with in-place store updates
- use the same migration lookup (getLatestMigration) in the VM model and on the VM detail page
- look up PVCs, PVs, VMIs and restore backups by id
- merge VMs and VMIs with a Set
- evaluate the VM state once when sorting by state
- check the unschedulable condition before the pod based state checks
- cache feature flag results and per-schema/per-setting values that are the same for every row
Bug fixes:
- the launcher pod map was never rebuilt, because the store keeps the same array
- pods, volumes and migrations of a VM with the same name in another namespace could be picked up
The order of the volumes of a VM (vm.volumes) now follows the VM spec instead of the store order. Nothing depends on it.
Measured in a synthetic setup, 100 rows per page, sorting by state (Chrome, dev build):
- ~490 VMs, ~500 PVCs/PVs: 1.9 s -> 1.0 s
- ~490 VMs, 600 PVs, 200 migrations: 6.0 s -> 0.7 s, main thread blocked during VM updates 78% -> 32%
With few volumes the gain is much smaller (8-20%).
Related to: https://github.com/harvester/harvester/issues/9513
Signed-off-by: Volker Theile <vtheile@suse.com>
* fix: read VM data from the store of the resource instead of a fixed one
The migrations of a VMI and the migration badge of the state column were read from the hardcoded `harvester` store. In the Rancher explorer (embedded and standalone) the data is loaded into the `cluster` store, so a running migration was shown neither in the VM state nor as badge.
The VM model remembered the store of the current product in a module variable on first use and never updated it. The same model is used in the Harvester product (`harvester` store) and in the Rancher explorer (`cluster` store), and Rancher keeps the page loaded when going from the explorer of a Harvester cluster to Virtualization Management and into the Harvester product. The VM list then read the VMIs, launcher pods, volumes and restores from the wrong store, and running VMs were shown as Starting until the page was reloaded.
Read the data from the store the resource lives in (`this.$getters`, in the formatter the store of the current product). In the Harvester product this is still the `harvester` store, so nothing changes there.
Not covered: volume details like the lock icon of encrypted volumes. The explorer uses the generic Rancher PVC model, which does not know them, and settings based checks (feature flags, backup target) are not loaded there either.
Related to: https://github.com/harvester/harvester/issues/11882
Signed-off-by: Volker Theile <vtheile@suse.com>
---------
Signed-off-by: Volker Theile <vtheile@suse.com>
* feat: add k3k addon UI
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: add rancher-k3k addon UI
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: copilot review
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: copilot review
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: remove k3k edit page
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: k3k addon description
Signed-off-by: Andy Lee <andy.lee@suse.com>
---------
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor(host): update resource usage gauges and table column headers
- Replace ConsumptionGauge with PercentageBar in CPU/Memory/Storage
formatters to show the percentage next to the progress bar
- Rename the Disk State column header to Disk (via i18n)
- Display the CPU Manager column header on two lines
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: add noopener noreferrer rel
Signed-off-by: Andy Lee <andy.lee@suse.com>
---------
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: allow user to select kube-system ns
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: add NICs tab when creating overlay network
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: only show NIC tab if ns is kube-system
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: add NAT & Internet tabs
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: add provider networks / vlan edit pages
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: add edit pages
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: review comments
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: copilot review
Signed-off-by: Andy Lee <andy.lee@suse.com>
---------
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: allow user to select kube-system ns
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: add NICs tab when creating overlay network
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: only show NIC tab if ns is kube-system
Signed-off-by: Andy Lee <andy.lee@suse.com>
---------
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: clear selected VM rows after click bulk action
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: await altStopVM action
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: multiple VM start actions
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: modify altRestartVM()
Signed-off-by: Andy Lee <andy.lee@suse.com>
---------
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: add Host Network tab
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: add Host Network edit page
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: add node selector tab
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: copilot review
Signed-off-by: Andy Lee <andy.lee@suse.com>
* fix: lint
Signed-off-by: Andy Lee <andy.lee@suse.com>
* fix: copilot review
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: add warning message if addon is not enabled or already hasone
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: some wordings in en-us.yaml
Signed-off-by: Andy Lee <andy.lee@suse.com>
---------
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: add VM display name annotation support in edit and list views
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: add display name checkbox and input field
Signed-off-by: Andy Lee <andy.lee@suse.com>
---------
Signed-off-by: Andy Lee <andy.lee@suse.com>
* fix: some actions limited for virt-viewer
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: based on schema collectionMethods
Signed-off-by: Andy Lee <andy.lee@suse.com>
* fix: conditionally add migrate action to available actions
* fix: update collectionMethods check to use find for case-insensitive matching
* fix: update canEditClusterMembers method to use schema for collectionMethods
* fix: update canCreateImage check to use case-insensitive matching
---------
Signed-off-by: Andy Lee <andy.lee@suse.com>
* fix: remove unneeded persistentvolumeclaim type label translation key
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: improve lockIconTooltipMessage call twice
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: avoid watch allVMs
Signed-off-by: Andy Lee <andy.lee@suse.com>
* perf: improve the some functions with pre-created map
Signed-off-by: Andy Lee <andy.lee@suse.com>
* perf: improve the vm list page
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: AI comment
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: based on feedback
Signed-off-by: Andy Lee <andy.lee@suse.com>
---------
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: add banner in PCI Devices page
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: based on copilot review
Signed-off-by: Andy Lee <andy.lee@suse.com>
---------
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: support advance option and creation from DataVolume
- advance option would let user change the accessMode/volumeMode
- creation from DataVolume could supports various scenario with
3rd-party storage
Signed-off-by: Vicente Cheng <freeze.bilsted@gmail.com>
* feat: add data migration action on volume page
Signed-off-by: Vicente Cheng <freeze.bilsted@gmail.com>
* refactor: use show advanced options link instead of checkbox
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: add feature flag
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: add feature flag for dataMigration action
Signed-off-by: Andy Lee <andy.lee@suse.com>
---------
Signed-off-by: Vicente Cheng <freeze.bilsted@gmail.com>
Signed-off-by: Andy Lee <andy.lee@suse.com>
Co-authored-by: Andy Lee <andy.lee@suse.com>
* feat: show notification if there is VM pending restart
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: update based on comments
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: calculate count from vm names
Signed-off-by: Andy Lee <andy.lee@suse.com>
---------
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: add wanring message when disabling a device that haven not been detached in the backend
Signed-off-by: Jack Yu <jack.yu@suse.com>
* fix: remove unused en-us key
Signed-off-by: Jack Yu <jack.yu@suse.com>
---------
Signed-off-by: Jack Yu <jack.yu@suse.com>
* feat(vmimport): First working side nav attempt
Add vmimport entries when the related resource actually exists aka addon was enabled
Signed-off-by: Dominik Wombacher <dominik.wombacher@suse.com>
* feat(vmimport): improved version that uses 'store.watch' instead of polling
Signed-off-by: Dominik Wombacher <dominik.wombacher@suse.com>
* fix(vmimport): further tuning of dynamic side navi load/unload
Code formatting and commits. Also safeguard if something is wrong with the store
Signed-off-by: Dominik Wombacher <dominik.wombacher@suse.com>
* refactor(vmimport): separate vmimport side nav entries from dynamic logic
function registerAddonSideNav introduced in utils/dynamic-nav.js
Decouples vmimport side nav entries from the hide/unhide based on addon status logic
Makes it reusable in the UI with other AddOns in the future
Signed-off-by: Dominik Wombacher <dominik.wombacher@suse.com>
* feat(vmimport): add custom headers for HCI.VMIMPORT
Signed-off-by: Dominik Wombacher <dominik.wombacher@suse.com>
* feat(vmimport): add custom headers for HCI.VMIMPORT_SOURCE_V
Signed-off-by: Dominik Wombacher <dominik.wombacher@suse.com>
* feat(vmimport): add custom headers for HCI.VMIMPORT_SOURCE_O
Signed-off-by: Dominik Wombacher <dominik.wombacher@suse.com>
* fix(vmimport): array instead string passed to configureType
Caused routing issues for CRUD operations
Labels moved to labelTypes section to follow standards
Signed-off-by: Dominik Wombacher <dominik.wombacher@suse.com>
* fix(vmimport): registerAddonSideNav improved and refactored
Clear comments, code refactoring, additional checks and validations
Signed-off-by: Dominik Wombacher <dominik.wombacher@suse.com>
* fix(vmimport): show correct status for virtualmachineimport
Signed-off-by: Dominik Wombacher <dominik.wombacher@suse.com>
* feat(vmimport): custom list components with ns grouping
Signed-off-by: Dominik Wombacher <dominik.wombacher@suse.com>
* fix(vmimport): 404 on refresh and missing menu entry
Restores virtualType definitions to register routes synchronously,
preventing 404 errors during page reload.
Updates dynamic-nav to force-fetch addon data if missing, fixing
hidden menu issues on direct page access.
Restores explicit label keys for virtualTypes to ensure correct
naming in the side navigation.
Signed-off-by: Dominik Wombacher <dominik.wombacher@suse.com>
* feat(vmimport): add edit form for VirtualMachineImport resource
Adds a UI form for VirtualMachineImport to replace manual YAML editing.
The form fetches VmwareSource and OpenstackSource objects for the
source selection dropdown.
It validates the VM name against RFC-1123 rules and filters out
internal storage classes. Users can also configure network mappings
via a dynamic list.
Signed-off-by: Dominik Wombacher <dominik.wombacher@suse.com>
* feat(vmimport): add edit form for VmwareSource
Adds a UI to configure VmwareSource resources including the endpoint
and datacenter fields.
For authentication, users can either select an existing Secret or
enter a username and password directly. The form handles creating
the required Kubernetes Secret in the background when new credentials
are provided.
Signed-off-by: Dominik Wombacher <dominik.wombacher@suse.com>
* feat(vmimport): add edit form for OpenstackSource
Custom edit form for OpenstackSource resource. Creates new secret
or lets users select existing secrets. Support all fields the CRD has.
Signed-off-by: Dominik Wombacher <dominik.wombacher@suse.com>
* chore(vmimport): vmware source default endpoint and datacenter renamed
Signed-off-by: Dominik Wombacher <dominik.wombacher@suse.com>
* feat(vmimport): add edit form for OvaSource
OvaSource (new in harvester / vm-import-controller v1.7.0).
Imports VMs from an OVA file using via HTTP or HTTPS.
The form supports URL configuration and optional Basic Auth using a
username and password. Users can also provide an optional CA Certificate
for HTTPS verification and configure advanced HTTP timeout settings.
VirtualMachineImport edit page to updated to include OvaSource in
the source dropdown.
Signed-off-by: Dominik Wombacher <dominik.wombacher@suse.com>
* chore(vmimport): align tab names on openstacksource
Signed-off-by: Dominik Wombacher <dominik.wombacher@suse.com>
* fix(vmimport): import { TextArea } from '@components/Form/TextArea' not found
Signed-off-by: Dominik Wombacher <dominik.wombacher@suse.com>
* fix(vmimport): 'Destination Network' don't list all networks
Online listed the 'mgmt' Network. Adjust to read all Virtual Machine Networks.
Signed-off-by: Dominik Wombacher <dominik.wombacher@suse.com>
* feat(vmimport): rename side-nav entry to 'Virtual Machine Imports'
Signed-off-by: Dominik Wombacher <dominik.wombacher@suse.com>
* fix(vmimport): OvaSource Auth tab throws error selecting existing secret
Signed-off-by: Dominik Wombacher <dominik.wombacher@suse.com>
* fix(vmimport): Add missing caCert input field to vmware source
Signed-off-by: Dominik Wombacher <dominik.wombacher@suse.com>
* refactor(vmimport): use 'LabeledInput' instead of 'TextAreaAutoGrow' for cacert fields
Changing the type allows labels to show up in the UI
Signed-off-by: Dominik Wombacher <dominik.wombacher@suse.com>
* refactor(vmimport): Move vars into types files and reference them
Signed-off-by: Dominik Wombacher <dominik.wombacher@suse.com>
* refactor(vmimport): Use 'currentProduct' value instead of hardcoded 'harvester' string
Signed-off-by: Dominik Wombacher <dominik.wombacher@suse.com>
* refactor(vmimport): shorten 'selectedOption.raw' usage
Signed-off-by: Dominik Wombacher <dominik.wombacher@suse.com>
* refactor(vmimport): Checks to make splice() usage more robust
Signed-off-by: Dominik Wombacher <dominik.wombacher@suse.com>
* refactor(vmimport): re-use existing rfc1123 val function
Move rfc1123 validation error message to l10n/en-us.yaml
Signed-off-by: Dominik Wombacher <dominik.wombacher@suse.com>
* fix(vmimport): var name typo in vmi edit rfc1123 check
Signed-off-by: Dominik Wombacher <dominik.wombacher@suse.com>
* feat(vmimport): vmi use 'FormValidation' and l10n for labels
Signed-off-by: Dominik Wombacher <dominik.wombacher@suse.com>
* feat(vmimport): oss use 'FormValidation' and l10n for labels
Signed-off-by: Dominik Wombacher <dominik.wombacher@suse.com>
* feat(vmimport): ovas use 'FormValidation' and l10n for labels
Signed-off-by: Dominik Wombacher <dominik.wombacher@suse.com>
* feat(vmimport): vms use 'FormValidation' and l10n for labels
Signed-off-by: Dominik Wombacher <dominik.wombacher@suse.com>
* refactor(vmimport): Display error message at the top of the page
Signed-off-by: Volker Theile <vtheile@suse.com>
---------
Signed-off-by: Dominik Wombacher <dominik.wombacher@suse.com>
Signed-off-by: Volker Theile <vtheile@suse.com>
Co-authored-by: Volker Theile <vtheile@suse.com>
* feat: add vGPU MIGConfiguration page
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: add detail page
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: add banner
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: allow editConfig when status is empty
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: remove unneeded code
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: only show disable action if MIGConfig is enabled
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: some UI flow changes
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: show configured profile in table
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: show configured profiles with requested count
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: based on review
Signed-off-by: Andy Lee <andy.lee@suse.com>
---------
Signed-off-by: Andy Lee <andy.lee@suse.com>
* fix: hide VM take backup action if backup target is not available
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: use extracted func
Signed-off-by: Andy Lee <andy.lee@suse.com>
---------
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: add maxCPU and maxMemory
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: add hotplug dialog
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: add restart message
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: let VM template support cpuMemoryHotplug
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: add feature flag
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: add max-hotplug-ratio setting
Signed-off-by: Andy Lee <andy.lee@suse.com>
---------
Signed-off-by: Andy Lee <andy.lee@suse.com>
* chore: disable vmstate-persistence and longhorn-static StorageClasses
Signed-off-by: Nick Chung <nick.chung@suse.com>
* chore: allow internal storage class deletions in image and volumn
Signed-off-by: Nick Chung <nick.chung@suse.com>
* chore: remove deletion tooltips in image and volume pages
Signed-off-by: Nick Chung <nick.chung@suse.com>
* chore: rollback style changes of image and volume lists
Signed-off-by: Nick Chung <nick.chung@suse.com>
---------
Signed-off-by: Nick Chung <nick.chung@suse.com>
Volker TheileandMarcelo Fukumoto
Andy Lee
Renuka Devi Rajendran
freezeandAndy Lee
Yiya Chen
Dominik WombacherandVolker Theile
Nick Chung
Francesco Torchia