Commit Graph
31 Commits
Author SHA1 Message Date
mergify[bot]andMarcelo Fukumoto d8d33ff14f feat: page the VM list on the server when the API supports it (#1261) (#1273)
* feat: page the VM list on the server when the API supports it

On clusters whose API serves lists from the Steve SQL cache, the VM list
uses PaginatedResourceTable: it loads one page of VMs, and the VMIs, pods,
PVCs, PVs, migrations, restores and backups of those VMs only. Sorting,
search and the namespace filter run on the server, so CPU, memory, IP and
node can't be sorted or searched there.

The feature is gated by the vmListPagination feature flag and enabled for
the VM list only, through a pagination context. Older clusters keep the
current list.



* feat: enable the VM list pagination from v1.10.0

The backend change that serves API lists from the SQL cache has to be on
the v1.10 branch before this is merged.



* fix: keep the paged VM list when adding a volume

The Add Volume dialog loaded every VM to find the volumes in use, which
replaced the page the VM list keeps in the store and emptied the list.
When the list is paged, the dialog now reads only the VMs of the
namespace and doesn't store them.

The requests for the resources of a page use one IN filter instead of
one filter per value, which keeps the URLs about a third as long.



* fix: keep the paged VM list intact in its dialogs and on older APIs

The Add Volume, Storage Migration and Restore dialogs read the VMs, PVCs
and backups of the VM's namespace through the VM. While the list keeps a
page of a type in the store they read the namespace without storing it,
so the list keeps its page and the dialogs' own lists don't shrink when
the page reloads. Storage Migration no longer offers volumes of VMs on
other pages as targets.

The list is paged only when the API lists the VM's printer columns as
metadata.fields, which the SQL cache does, so a missing or non-semver
server version can't turn it on against an API that can't filter.

One failed request for a page's resources no longer stops the others.



* fix: show the restart notice only when its VMs change

The list rebuilds the names of the VMs that need a restart on every
refresh, and when it pages also on every page, sort and search, so the
notice popped up again each time even when nothing new needed a
restart. Show it only when the set of VMs changes.

While paging it still covers only the VMs on the current page: the API
can't filter VMs by their RestartRequired condition.



* fix: find the launcher pods of every VM on the page

The paged list loaded the page's launcher pods by the harvesterhci.io/vmName
label, which only the Harvester VM form writes into a VM's template. VMs
created any other way, like an imported VM or one applied with kubectl,
got no pod, so their rows lost View Logs and the starting and pod error
states.

Load the pods after the page's VMIs instead, by the kubevirt.io/created-by
label KubeVirt puts on every launcher pod (the VMI's UID).

Also cover the paged mode in the tests: it must not load every VMI,
migration or pod, and a forced refresh must reach every request.



* fix: notify about restarts again when coming back to the VM list

The restart notice compared the VMs that need a restart with the
previous value of the list. Coming back from a page that loads every VM,
like Volumes or a VM's detail page, that previous value already held the
same VMs, so the notice didn't show. Remember what was notified on the
list itself instead, so each visit starts fresh, and compare by namespace
and name, so a VM of the same name in another namespace counts as a
change.

Also say which VMs lack Harvester's vmName label: the ones from Forklift
or plain manifests, not every VM created outside the UI.



* refactor: keep the VM list's paging helpers in the component

Only canPaginate stays outside, because ResourceList calls
$loadingResources(route, store) on the component options, where there is
no `this`. The pagination headers become a computed property and the
printer column lookup a method.



* refactor: always list VMs with PaginatedResourceTable

PaginatedResourceTable handles both modes. fetchSecondaryResources loads
every pod, volume, restore, backup, VMI and migration when the list isn't
paged, and only what every row shares when it is. VMIs without a VM are
added back through localFilter, which only runs without pagination.

The list passes the pagination context only when the cluster's API can
page, so older clusters keep the full list.



* refactor: register the VM list's columns with the product

Both column sets go through the product's headers(), with the paged set
next to the unpaged one in config/table-headers.js. The list only adds the
node and restore progress columns, which the API can't sort or search when
paging. State sorts by the VM's Status printer column, metadata.fields.2.



* fix: show the restart notice when coming back to the VM list

Since the list always uses PaginatedResourceTable it reads the VMs from
the store. Coming back to the list the store already holds them, so the
restart watcher never saw a change and the notice didn't show. Run it
when the list is created too.

While paging, the store can still hold the VMs another view loaded, like
every VM after Volumes or a VM's detail, so wait for the list's own page
before notifying.



* fix: let the namespace filter know the VM list is paged

The VMs were registered for pagination with a context that only the VM
list passed. The header's namespace filter asks without one, so it didn't
know the list was paged and kept offering "Not in a Project", which the
paged API can't filter by: picking it hid every VM.

Register the VMs in every context and answer per cluster in the store's
paginationEnabled getter instead: only when the feature is on and the
API lists the VM's printer columns as metadata.fields, as the SQL cache
does. The filter, the list and the store now agree, and clusters whose
API can't page keep the full list.

The filter is shared by every list, so Not in a Project can still be
picked on a list that doesn't page. The paged VM list then asks for
another option, like the shell's generic lists do, instead of showing
no rows.



* fix: keep the paged VM list when showing a VM's configuration

The Config tab of the Show Configuration drawer renders the VM form,
which loads every VM, PVC, PV, VMI and migration, and its device tabs
every VM again. On a paged list that replaced the list's page in the
store and emptied the list.

Hide the Config tab while the store keeps a page of VMs, so the drawer
shows the YAML. The VM's own page still shows its configuration, and a
drawer opened where every VM is loaded keeps its Config tab.



* refactor: define the VM list's node and restore columns with the others

The node and restore progress columns are now in VM_HEADERS, so the paged
set turns their sort and search off through VM_PAGINATION_FIELDS, like the
other columns the API can't index. The list only leaves them out when they
don't apply: the node column when the cluster's nodes can't be seen, the
restore progress while no backup is being restored.



---------


(cherry picked from commit 0c6eee1744)

Signed-off-by: Marcelo Fukumoto <marcelo.fukumoto@suse.com>
Co-authored-by: Marcelo Fukumoto <marcelo.fukumoto@suse.com>
2026-11-21 01:47:34 +08:00
mergify[bot]andPo Han Huang 8ac059b2d6 ui: add Upgrade Storage Class selector for v1.10+ upgrade flows (#1249) (#1266)
Add a StorageClass selector to online and air-gapped upgrade pages when
the repositoryStorageClass feature is enabled (v1.10+).

- Online: stores selection in harvesterhci.io/upgrade-storage-class annotation
- Air-gapped: stores selection in image spec.targetStorageClassName
- Selector locked while uploaded image exists; unlocked on switch to URL
- Hidden on pre-v1.10 clusters


(cherry picked from commit aa5a501c29)

Signed-off-by: pohanhuang <pohan.huang@suse.com>
Co-authored-by: Po Han Huang <pohan.huang@suse.com>
2026-11-20 20:01:31 +08:00
Volker Theile 5f13aadeed feat: Make use of status conditions when activating maintenance mode (#1145)
Related to: https://github.com/harvester/harvester/issues/9022

Signed-off-by: Volker Theile <vtheile@suse.com>
2026-10-07 13:17:01 +02:00
Alejandro BonillaandClaude 528255dea4 feat: expose KubeVirt high-performance storage features in VM and Volume UI (#1133)
* feat: expose KubeVirt high-performance storage features in VM and Volume UI

Adds UI to configure KubeVirt high-performance disk/storage settings that
were previously only reachable via VMBuilder/Terraform:

- Per-volume "Storage Performance Options": a performance profile
  (Default / High Performance / Custom) exposing per-disk cache, io and
  dedicatedIOThread on all disk types (VM image/root, new, existing,
  container) and on the standalone Volume form.
- VM-wide "High Performance (I/O Threads and Multi-Queue)": blockMultiQueue
  and ioThreadsPolicy (+ supplemental-pool thread count), shown only in the
  VM section since these are domain-level and cannot be set per-PVC.
- Compatibility guardrails: io=native forces cache=none; cache=none on
  Filesystem volumeMode warns; blockMultiQueue requires a virtio disk.

Ref: harvester/harvester#11550

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Signed-off-by: Alejandro Bonilla <abonilla@suse.com>

* fix: address review feedback on high-performance storage UI

Resolves the Copilot review comments on #1133:

- Gate the whole feature behind a new `highPerformanceStorage` release
  feature flag (v1.9.0) so older supported clusters never render the
  controls or receive unsupported KubeVirt fields.
- Force Cache Mode to "none" whenever Native I/O is selected, including
  from the "Default" ('') cache value, and disable every non-"none" cache
  option (Default included) while Native is active. Previously the empty
  cache value slipped past the guardrail and produced an invalid combo.
- Clear an already-enabled blockMultiQueue when the last virtio disk is
  removed, so a disabled checkbox can no longer persist an invalid setting.
- Strip stale cache/io/dedicatedIOThread fields from the merged disk spec
  when a regenerated disk no longer requests them, so switching a disk back
  to "Default" (or unchecking Dedicated I/O Thread) while editing no longer
  silently preserves the previous values.
- Expose the disclosure toggle's state to assistive tech via aria-expanded
  and an expand/collapse aria-label.
- Add unit tests for the profile transitions and the Native/cache guardrails.

Ref: harvester/harvester#11550

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Signed-off-by: Alejandro Bonilla <abonilla@suse.com>

* fix: address second-round review on high-performance storage UI

Resolves the two Copilot findings on #1133 and votdev's UX feedback on
harvester/harvester#11550:

- Restore the disk's original bus when the performance profile goes back
  to "Default". The "High Performance" preset switches the bus to virtio,
  but leaving the preset only cleared cache/io/dedicatedIOThread, so a
  SATA/SCSI disk was silently left on virtio — a bus change that can make
  an existing guest unbootable. The pre-preset bus is now remembered and
  put back, unless the user picked a different bus themselves in the
  meantime.
- Pass the VM-wide performance values from the VM detail page to the
  shared Volume component. The mixin already parsed them via
  getInitConfig(), but the detail caller never forwarded them, so
  VMPerformanceOptions fell back to its prop defaults and hid itself in
  view mode — configured blockMultiQueue / ioThreadsPolicy settings were
  invisible. They are also refreshed in the value watcher so the panel
  does not go stale.
- Make the VM-wide "High Performance" panel expandable/collapsible,
  matching the per-volume "Storage Performance Options" disclosure. It
  stays collapsed unless the VM already has something configured, so the
  average user is not faced with specialist tuning controls by default.
- Fix the unit tests to use Vue Test Utils v2 mount options. They used
  the v1 top-level `mocks` key, which VTU 2.x ignores, so every case
  failed on mount. The repo has no jest config or test script, so this
  was not caught. Add coverage for the bus save/restore behaviour.

Ref: harvester/harvester#11550

Co-Authored-By: Claude <noreply@anthropic.com>
Signed-off-by: Alejandro Bonilla <abonilla@suse.com>

---------

Signed-off-by: Alejandro Bonilla <abonilla@suse.com>
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
2026-10-02 17:48:18 +08:00
Jack Yu f6dffe9816 feat: support skip MIG mode configuration in srivogpu (#1009)
Signed-off-by: Jack Yu <jack.yu@suse.com>
2026-07-20 11:22:40 +08:00
Andy Lee 531ed03796 feat: allow user specify static IP when VM creation (#973)
* feat: allow suer give static IP for VM

Signed-off-by: Andy Lee <andy.lee@suse.com>

* feat: add feature flag

Signed-off-by: Andy Lee <andy.lee@suse.com>

---------

Signed-off-by: Andy Lee <andy.lee@suse.com>
2026-07-09 13:17:19 +08:00
Andy Lee 59f260eab8 fix: vpc topology should consume NAD labels (#975)
Signed-off-by: Andy Lee <andy.lee@suse.com>
2026-07-08 13:47:25 +08:00
Volker Theile 495e80267d feat: Unattend.xml support for Windows (#954)
Documentation: https://kubevirt.io/user-guide/user_workloads/startup_scripts/#sysprep
Related to: https://github.com/harvester/harvester/issues/1836

Signed-off-by: Volker Theile <vtheile@suse.com>
2026-07-06 08:45:33 +02:00
Andy Lee b9334bafb7 feat: add overlay networks and underlay networks resources page (#938)
* feat: allow user to select kube-system ns

Signed-off-by: Andy Lee <andy.lee@suse.com>

* feat: add NICs tab when creating overlay network

Signed-off-by: Andy Lee <andy.lee@suse.com>

* refactor: only show NIC tab if ns is kube-system

Signed-off-by: Andy Lee <andy.lee@suse.com>

* feat: add NAT & Internet tabs

Signed-off-by: Andy Lee <andy.lee@suse.com>

* feat: add provider networks / vlan edit pages

Signed-off-by: Andy Lee <andy.lee@suse.com>

* feat: add edit pages

Signed-off-by: Andy Lee <andy.lee@suse.com>

* refactor: review comments

Signed-off-by: Andy Lee <andy.lee@suse.com>

* refactor: copilot review

Signed-off-by: Andy Lee <andy.lee@suse.com>

---------

Signed-off-by: Andy Lee <andy.lee@suse.com>
2026-07-01 16:33:20 +08:00
Andy Lee ce2adbdc3b feat: support adding VM display name in creation page (#912)
* feat: add VM display name annotation support in edit and list views

Signed-off-by: Andy Lee <andy.lee@suse.com>

* refactor: add display name checkbox and input field

Signed-off-by: Andy Lee <andy.lee@suse.com>

---------

Signed-off-by: Andy Lee <andy.lee@suse.com>
2026-06-05 12:11:07 +08:00
freezeandAndy Lee 566e79eda5 feat: support advance option and creation from DataVolume (#776)
* feat: support advance option and creation from DataVolume

    - advance option would let user change the accessMode/volumeMode
    - creation from DataVolume could supports various scenario with
      3rd-party storage

Signed-off-by: Vicente Cheng <freeze.bilsted@gmail.com>

* feat: add data migration action on volume page

Signed-off-by: Vicente Cheng <freeze.bilsted@gmail.com>

* refactor: use show advanced options link instead of checkbox

Signed-off-by: Andy Lee <andy.lee@suse.com>

* feat: add feature flag

Signed-off-by: Andy Lee <andy.lee@suse.com>

* feat: add feature flag for dataMigration action

Signed-off-by: Andy Lee <andy.lee@suse.com>

---------

Signed-off-by: Vicente Cheng <freeze.bilsted@gmail.com>
Signed-off-by: Andy Lee <andy.lee@suse.com>
Co-authored-by: Andy Lee <andy.lee@suse.com>
2026-03-26 17:29:14 +08:00
Po Han Huang a2486a7d38 feat: ensure the state is pending when perform cloning the efi (#730)
* feat: ensure the state is pending when perform cloning the efi

Signed-off-by: pohanhuang <pohan.huang@suse.com>

* feat: define harvesterhci.io/clone-backend-storage-status in labels-annotations.js

Signed-off-by: pohanhuang <pohan.huang@suse.com>

---------

Signed-off-by: pohanhuang <pohan.huang@suse.com>
2026-03-11 15:30:33 +08:00
Andy Lee 77599900b5 feat: add resume button for upgrade paused node (#698)
* feat: add nodeUpgradeOption setting

Signed-off-by: Andy Lee <andy.lee@suse.com>

* feat: add resume button when node paused

Signed-off-by: Andy Lee <andy.lee@suse.com>

* feat: add feature flag in v1.7.0

Signed-off-by: Andy Lee <andy.lee@suse.com>

---------

Signed-off-by: Andy Lee <andy.lee@suse.com>
2026-01-30 15:12:00 +08:00
Tim Liou 1352246e1e fix: drop mac-address annotation from vm template to prevent MAC address reusing (#663)
related-to: harvester/harvester#9788
related-to: harvester/harvester#9798

Signed-off-by: Tim Liou <tim.liou@suse.com>
2026-01-02 17:24:57 +08:00
Andy Lee b03fffbc30 feat: read addon displayname from label and add descheduler description (#644)
* refactor: display addon name from addon.harvesterhci.io/displayName label

Signed-off-by: Andy Lee <andy.lee@suse.com>

* refactor: add descheduler description

Signed-off-by: Andy Lee <andy.lee@suse.com>

---------

Signed-off-by: Andy Lee <andy.lee@suse.com>
2025-12-10 15:13:21 +08:00
Yiya ChenandAndy Lee ed2bc3100b feat: expose CDI settings (#418)
* feat: add cdi settings tab

Signed-off-by: Yi-Ya Chen <yiya.chen@suse.com>

* feat: basic layout

Signed-off-by: Yi-Ya Chen <yiya.chen@suse.com>

* feat: add fields mutation

Signed-off-by: Yi-Ya Chen <yiya.chen@suse.com>

* refactor: rename keys

Signed-off-by: Yi-Ya Chen <yiya.chen@suse.com>

* refactor: add edit mode

Signed-off-by: Yi-Ya Chen <yiya.chen@suse.com>

* refactor: remove isCreate

Signed-off-by: Yi-Ya Chen <yiya.chen@suse.com>

* feat: filter volume mode options

Signed-off-by: Yi-Ya Chen <yiya.chen@suse.com>

---------

Signed-off-by: Yi-Ya Chen <yiya.chen@suse.com>
Co-authored-by: Andy Lee <andy.lee@suse.com>
2025-07-25 13:55:54 +08:00
Andy Lee be9311dc0c feat: CPU / Memory hotplug support (#413)
* feat: add maxCPU and maxMemory

Signed-off-by: Andy Lee <andy.lee@suse.com>

* feat: add hotplug dialog

Signed-off-by: Andy Lee <andy.lee@suse.com>

* feat: add restart message

Signed-off-by: Andy Lee <andy.lee@suse.com>

* feat: let VM template support cpuMemoryHotplug

Signed-off-by: Andy Lee <andy.lee@suse.com>

* feat: add feature flag

Signed-off-by: Andy Lee <andy.lee@suse.com>

* feat: add max-hotplug-ratio setting

Signed-off-by: Andy Lee <andy.lee@suse.com>

---------

Signed-off-by: Andy Lee <andy.lee@suse.com>
2025-07-23 14:08:59 +08:00
Yiya Chen 85a06feb91 feat: disable vm images (#376)
Signed-off-by: Yi-Ya Chen <yiya.chen@suse.com>
2025-07-08 15:23:32 +08:00
Yiya Chen 29b1ab2fb9 feat: support manually configuring VM IP (#315)
* feat: add annotations

Signed-off-by: Yi-Ya Chen <yiya.chen@suse.com>

* feat: map annotation

Signed-off-by: Yi-Ya Chen <yiya.chen@suse.com>

* feat: add annotaion to template

Signed-off-by: Yi-Ya Chen <yiya.chen@suse.com>

---------

Signed-off-by: Yi-Ya Chen <yiya.chen@suse.com>
2025-06-06 10:03:37 +08:00
Yiya Chen b689e3aacf feat: disable label (#310)
Signed-off-by: Yi-Ya Chen <yiya.chen@suse.com>
2025-05-23 16:23:09 +08:00
Yiya Chen 796d98e61a fix: Harvester upgrade ISO related internal image can be selected to create VM when an upgrade is ongoing (#309)
* fix: filter out upgrade image

Signed-off-by: Yi-Ya Chen <yiya.chen@suse.com>

* refactor: add label constant

Signed-off-by: Yi-Ya Chen <yiya.chen@suse.com>

---------

Signed-off-by: Yi-Ya Chen <yiya.chen@suse.com>
2025-05-23 15:49:30 +08:00
Andy Lee aa9dd32cce Change isKVMDisable condition (#294)
* change condition to check isKVMDisable

Signed-off-by: Andy Lee <andy.lee@suse.com>

* change condition eq 0

Signed-off-by: Andy Lee <andy.lee@suse.com>

* add allNotExist back

Signed-off-by: Andy Lee <andy.lee@suse.com>

---------

Signed-off-by: Andy Lee <andy.lee@suse.com>
2025-05-19 10:17:07 +08:00
Andy Lee 90c923b480 Add volumeMode dropdown for third-party storage (#197)
Signed-off-by: Andy Lee <andy.lee@suse.com>
2025-03-12 14:25:37 +08:00
andy.lee 40794d89a0 add third party storage UI change
Signed-off-by: andy.lee <andy.lee@suse.com>
2025-02-19 12:59:28 +08:00
Yi-Ya Chen 375127a78a feat: add checkbox to skip checking
Signed-off-by: Yi-Ya Chen <yiya.chen@suse.com>
2025-02-11 15:09:13 +08:00
Francesco Torchia dc74441d26 Latest changes from Harvester master - d7d9d4af8a88d677695d7aff47a81d52041dfcca
Signed-off-by: Francesco Torchia <francesco.torchia@suse.com>
2024-11-12 11:50:17 +01:00
Francesco Torchia d15adeb8cf Move LABELS_TO_IGNORE_REGEX to harvester pkg and update imports
Signed-off-by: Francesco Torchia <francesco.torchia@suse.com>
2024-10-24 11:34:52 +02:00
Francesco Torchia 118aaf16b7 Latest changes from Harvester master - a537c1ae38eb7030542ac371f24ae3336cd9d422
Signed-off-by: Francesco Torchia <francesco.torchia@suse.com>
2024-10-23 17:01:40 +02:00
Francesco Torchia 8117e99b54 Update selected vGpus devices adding the provisioned devices
Signed-off-by: Francesco Torchia <francesco.torchia@suse.com>
2024-10-23 17:01:33 +02:00
Francesco Torchia ec3d88aeb7 Latest changes from harvester/master
Signed-off-by: Francesco Torchia <francesco.torchia@suse.com>
2024-10-23 17:01:03 +02:00
Francesco Torchia 675c45f77b Add types
Signed-off-by: Francesco Torchia <francesco.torchia@suse.com>
2024-10-23 17:00:44 +02:00