* feat: add the Kube-OVN VPC Egress Gateways page
List, create and edit VpcEgressGateway resources under Overlay Networks >
NAT & Internet, right below the NAT gateways, which are now labeled NAT
Gateways. The form covers the VPC, replicas, internal and external
subnets, SNAT policies, internal and external IPs, BFD and the bandwidth
limit, and keeps the fields it does not show.
* feat: add the VPC BFD port and link the Egress Gateway BFD warning to it
The VPC form gets a BFD Port tab with the enabled switch and its IP,
which an Egress Gateway with BFD needs. The gateway form now checks the
VPC's spec.bfdPort instead of a spec.bfd field that VPCs don't have, and
its warning links to the VPC. Bandwidth also takes quantities such as
1Gi, and a gateway that only uses selectors no longer needs a policy.
* feat: check the Egress Gateway and BFD port against what Kube-OVN accepts
Kube-OVN runs as a secondary CNI in Harvester, so an Egress Gateway's
internal subnet has to sit on a virtual machine network and its external
subnet on a network attachment; the subnet lists now offer only those.
The internal and external IPs must be unique and inside their subnet,
other than its gateway, and the two subnets must differ. Selectors don't
work in that mode, so a gateway needs a policy again. Policies set with
IP blocks show them, and BFD intervals hidden while BFD is off fall back
to their defaults.
Save stays disabled while either form is invalid, each field shows its
own error, and a tab with errors is marked. The VPC's BFD port IP can't
be in one of its subnets, its tab warns when it is turned off while
gateways of the VPC use BFD, and the gateway's BFD warning opens the
VPC's BFD Port tab in a new tab.
* fix: show why Save is disabled on the Egress Gateway and VPC forms
Every field that can block Save shows its own message once touched:
the name, the VPC and both subnets, which have none when left empty.
When the chosen VPC has no subnet on a virtual machine network, the
Internal Subnet placeholder says so.
A subnet can only be in one policy: the gateway leaves a source out of
SNAT when any policy has SNAT off for it, so the same subnet in a second
policy would silently ignore one of them. Enable SNAT explains what
turning it off needs.
* fix: keep one Egress Gateway policy for each SNAT setting
Kube-OVN merges the sources of every policy with the same SNAT setting,
so a second policy with SNAT on (or off) only adds to the first one.
The form now flags it on the second policy, Add Policy adds the setting
that isn't used yet and goes away once both exist, and the Policies tab
says a gateway has at most two policies. Policies with IP blocks are
left out of the check, since the form can't move those.
* refactor: ask for the Egress Gateway subnets with and without SNAT
Kube-OVN puts the sources of every policy into two sets, with SNAT and
without, and leaves a source out of SNAT when any policy has SNAT off
for it. A list of policies with a checkbox each let the form build
policies that only repeated or silently overrode each other, so the
Policies tab now asks for those two sets: Subnets with SNAT and Subnets
without SNAT, a subnet in one list only and at least one subnet in all.
Saving writes one policy for each list that has subnets.
Editing reads existing policies the way Kube-OVN applies them, so a
subnet that was in both lands in Subnets without SNAT, and IP blocks
set outside the form are kept and shown read-only.
* refactor: go back to the Egress Gateway policy list
The VpcEgressGateway CRD and the issue describe policies as a list,
each with snat and subnets, and Kube-OVN accepts any number of them:
policies with the same SNAT setting just work together. The two subnet
lists hid that shape and rewrote existing policies, and they couldn't
mark "one of these two" as required. This puts back the policy list,
where each policy needs a subnet and a subnet can be in one policy
only, which is the one case that changes what the gateway does. The
Policies tab now says how policies work together.
* refactor: ask for the Egress Gateway subnets with and without SNAT again
Kube-OVN only uses which subnets have SNAT and which don't, so two
lists, Subnets with SNAT and Subnets without SNAT, hold the same data
as the policy list, are clearer to fill in, and can't build a policy
that repeats or overrides another. Saving writes one policy for each
list that has subnets. Neither list is marked required: the Policies
tab says one subnet in either list is needed, and both lists show that
message once touched while they're empty.
* fix: show the Egress Gateway policy rule once for both subnet lists
One subnet in either list is enough, but a warning on each list read as
if both lists were required. The lists no longer show a warning; one
message under them says to select at least one subnet in either list
while both are empty, next to the tab mark and the disabled Save.
* fix: say why the Egress Gateway subnet lists are empty
The policy lists only offer subnets of the VPC chosen on the Basic tab,
so before a VPC is chosen they were empty with no reason given. They
now say to select a VPC on the Basic tab first, or that the chosen VPC
has no subnets.
* fix: make the Egress Gateway fields that need a VPC say so
Internal Subnet and both policy lists only offer subnets of the chosen
VPC, so they're disabled until a VPC is chosen and say to select one
first. The policy lists keep their dropdown attached to the field, so
it follows the field when a chip is removed instead of leaving a gap.
The BFD intervals are labeled Receive Interval and Transmit Interval,
which fit next to their unit, with a tooltip each.
* fix: keep the external subnet out of Egress Gateway policies and check usable IPs
Kube-OVN reroutes a policy's sources to the gateway, so the gateway's
own external subnet as a source would send its outbound traffic back
into it; the policy lists no longer offer it and the form flags it.
Static IPs must also be usable addresses: Kube-OVN assigns from the
network address + 1 to the broadcast address - 1, so those two are
rejected along with the gateway.
The policy rule is an error banner like the IP count rule, the BFD
multiplier has its own message, the IP Addresses and Bandwidth
instructions are hidden on the read-only page, and the VPC's warning
about gateways that need its BFD port reads right for one gateway.
* chore: declare ipaddr.js, which the subnet model imports
It was only installed as a dependency of webpack-dev-server.
* feat: support PrimaryCNI Egress Gateways
Kube-OVN v1.17 can send a gateway's traffic out through the pod network
when it isn't the primary CNI, as on Harvester. Such a gateway takes no
external subnet, external IPs or bandwidth, so the form couldn't save one.
The Basic tab now picks the external network, locked after creation, and
hides the fields PrimaryCNI doesn't take.
* fix: offer Primary CNI only when the cluster's CRD has it
Kube-OVN v1.16, in Harvester v1.10.0-rc1 and older, has no
externalNetworkMode and requires an external subnet, so a Primary CNI
gateway was rejected there. The form reads the CRD's schema definition
and only shows the External Network choice when the field exists.
---------
(cherry picked from commit e66b61d0d1)
Signed-off-by: Marcelo Fukumoto <marcelo.fukumoto@suse.com>
Co-authored-by: Marcelo Fukumoto <marcelo.fukumoto@suse.com>
* perf: speed up the VM list with many VMs
The VM list scanned whole store lists for every row and re-evaluated the same values per row on every render and sort. With several hundred VMs this blocked the browser on sorting and on every VM update.
Performance:
- look up launcher pods and migrations through shared indexes (namespace/name -> resource) instead of scanning per row; the indexes are computed per store list, so they stay in sync with in-place store updates
- use the same migration lookup (getLatestMigration) in the VM model and on the VM detail page
- look up PVCs, PVs, VMIs and restore backups by id
- merge VMs and VMIs with a Set
- evaluate the VM state once when sorting by state
- check the unschedulable condition before the pod based state checks
- cache feature flag results and per-schema/per-setting values that are the same for every row
Bug fixes:
- the launcher pod map was never rebuilt, because the store keeps the same array
- pods, volumes and migrations of a VM with the same name in another namespace could be picked up
The order of the volumes of a VM (vm.volumes) now follows the VM spec instead of the store order. Nothing depends on it.
Measured in a synthetic setup, 100 rows per page, sorting by state (Chrome, dev build):
- ~490 VMs, ~500 PVCs/PVs: 1.9 s -> 1.0 s
- ~490 VMs, 600 PVs, 200 migrations: 6.0 s -> 0.7 s, main thread blocked during VM updates 78% -> 32%
With few volumes the gain is much smaller (8-20%).
Related to: https://github.com/harvester/harvester/issues/9513
Signed-off-by: Volker Theile <vtheile@suse.com>
* fix: read VM data from the store of the resource instead of a fixed one
The migrations of a VMI and the migration badge of the state column were read from the hardcoded `harvester` store. In the Rancher explorer (embedded and standalone) the data is loaded into the `cluster` store, so a running migration was shown neither in the VM state nor as badge.
The VM model remembered the store of the current product in a module variable on first use and never updated it. The same model is used in the Harvester product (`harvester` store) and in the Rancher explorer (`cluster` store), and Rancher keeps the page loaded when going from the explorer of a Harvester cluster to Virtualization Management and into the Harvester product. The VM list then read the VMIs, launcher pods, volumes and restores from the wrong store, and running VMs were shown as Starting until the page was reloaded.
Read the data from the store the resource lives in (`this.$getters`, in the formatter the store of the current product). In the Harvester product this is still the `harvester` store, so nothing changes there.
Not covered: volume details like the lock icon of encrypted volumes. The explorer uses the generic Rancher PVC model, which does not know them, and settings based checks (feature flags, backup target) are not loaded there either.
Related to: https://github.com/harvester/harvester/issues/11882
Signed-off-by: Volker Theile <vtheile@suse.com>
---------
Signed-off-by: Volker Theile <vtheile@suse.com>
* feat: use prime logo when server-flavor is prime
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: expose server-flavor setting
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: copilot review
Signed-off-by: Andy Lee <andy.lee@suse.com>
---------
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: add k3k addon UI
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: add rancher-k3k addon UI
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: copilot review
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: copilot review
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: remove k3k edit page
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: k3k addon description
Signed-off-by: Andy Lee <andy.lee@suse.com>
---------
Signed-off-by: Andy Lee <andy.lee@suse.com>
* fix: vGPU doesn't display in edit VM page
Signed-off-by: Andy Lee <andy.lee@suse.com>
* fix: align PCI passthrough action buttons height
Match the enable/disable passthrough and Actions dropdown buttons to 40px and move the selected-count label below them.
Signed-off-by: Andy Lee <andy.lee@suse.com>
---------
Signed-off-by: Andy Lee <andy.lee@suse.com>
* deps: update rancher/shell to 3.0.12-rc.7
Signed-off-by: Andy Lee <andy.lee@suse.com>
* fix: move filter labels/schedule buttons position
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: improve serial console
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat(serial-console): add terminal search toolbar and highlight tuning
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: clear searach result after close
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: fine tune serial console
Signed-off-by: Andy Lee <andy.lee@suse.com>
---------
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: add customized migration plan delete model
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: copilot review
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: copilot review
Signed-off-by: Andy Lee <andy.lee@suse.com>
---------
Signed-off-by: Andy Lee <andy.lee@suse.com>
* fix: hide Virtul machine migration tabs if forklift addon is not enabled
Signed-off-by: Andy Lee <andy.lee@suse.com>
* fix: rename advanced to configurations
Signed-off-by: Andy Lee <andy.lee@suse.com>
* fix: fixed column width
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: review comment
Signed-off-by: Andy Lee <andy.lee@suse.com>
* revert: power on background color
Signed-off-by: Andy Lee <andy.lee@suse.com>
---------
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: clear selected VM rows after click bulk action
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: await altStopVM action
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: multiple VM start actions
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: modify altRestartVM()
Signed-off-by: Andy Lee <andy.lee@suse.com>
---------
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: add support for volume expansion in storage configuration
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: update volume expansion wording
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: hide checkbox if feature flag is not enabled
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: revert unneeded change
Signed-off-by: Andy Lee <andy.lee@suse.com>
---------
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: add VM display name annotation support in edit and list views
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: add display name checkbox and input field
Signed-off-by: Andy Lee <andy.lee@suse.com>
---------
Signed-off-by: Andy Lee <andy.lee@suse.com>
* fix: vGPU / USB enable/disable actions needs to be hidden for read only users
Signed-off-by: Andy Lee <andy.lee@suse.com>
* style: add scoped styles for group actions in DeviceList component
Signed-off-by: Andy Lee <andy.lee@suse.com>
* style: remove width property from group actions in DeviceList components
Signed-off-by: Andy Lee <andy.lee@suse.com>
* fix: update logging type in init function and improve SideNav visibility handling
Signed-off-by: Andy Lee <andy.lee@suse.com>
* fix: ensure canManageGroup only returns true for non-empty rows with updatable permissions
Signed-off-by: Andy Lee <andy.lee@suse.com>
---------
Signed-off-by: Andy Lee <andy.lee@suse.com>
* fix: add alternative action for VM restart and soft reboot
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: fix alignment
Signed-off-by: Andy Lee <andy.lee@suse.com>
---------
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: enhance VM migration functionality and localization
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: add allVmsOnTargetNode method and update migration titles in localization
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: enhance migration error handling and update localization for migration dialog
Signed-off-by: Andy Lee <andy.lee@suse.com>
---------
Signed-off-by: Andy Lee <andy.lee@suse.com>
* fix: some actions limited for virt-viewer
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: based on schema collectionMethods
Signed-off-by: Andy Lee <andy.lee@suse.com>
* fix: conditionally add migrate action to available actions
* fix: update collectionMethods check to use find for case-insensitive matching
* fix: update canEditClusterMembers method to use schema for collectionMethods
* fix: update canCreateImage check to use case-insensitive matching
---------
Signed-off-by: Andy Lee <andy.lee@suse.com>
* fix: remove unneeded persistentvolumeclaim type label translation key
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: improve lockIconTooltipMessage call twice
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: avoid watch allVMs
Signed-off-by: Andy Lee <andy.lee@suse.com>
* perf: improve the some functions with pre-created map
Signed-off-by: Andy Lee <andy.lee@suse.com>
* perf: improve the vm list page
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: AI comment
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: based on feedback
Signed-off-by: Andy Lee <andy.lee@suse.com>
---------
Signed-off-by: Andy Lee <andy.lee@suse.com>
* fix: change auth/V3user to auth/user
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: extract to utils/auth.js
Signed-off-by: Andy Lee <andy.lee@suse.com>
---------
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: add nvidia driver toolkit dialog
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: add disable button guard
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: based on feedback
Signed-off-by: Andy Lee <andy.lee@suse.com>
---------
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: support advance option and creation from DataVolume
- advance option would let user change the accessMode/volumeMode
- creation from DataVolume could supports various scenario with
3rd-party storage
Signed-off-by: Vicente Cheng <freeze.bilsted@gmail.com>
* feat: add data migration action on volume page
Signed-off-by: Vicente Cheng <freeze.bilsted@gmail.com>
* refactor: use show advanced options link instead of checkbox
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: add feature flag
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: add feature flag for dataMigration action
Signed-off-by: Andy Lee <andy.lee@suse.com>
---------
Signed-off-by: Vicente Cheng <freeze.bilsted@gmail.com>
Signed-off-by: Andy Lee <andy.lee@suse.com>
Co-authored-by: Andy Lee <andy.lee@suse.com>
* feat: ensure the state is pending when perform cloning the efi
Signed-off-by: pohanhuang <pohan.huang@suse.com>
* feat: define harvesterhci.io/clone-backend-storage-status in labels-annotations.js
Signed-off-by: pohanhuang <pohan.huang@suse.com>
---------
Signed-off-by: pohanhuang <pohan.huang@suse.com>
* feat: add another filter button
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: add feature falg to hide vGPU enable/disable actions in PCIDevices page
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: update with conditionally rendering
Signed-off-by: Andy Lee <andy.lee@suse.com>
---------
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: add Insecure Skip TLS Verify checkbox
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: set insecureSkipTLSVerify default to false
Signed-off-by: Andy Lee <andy.lee@suse.com>
* fix: conflict
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: remove unneeded change
Signed-off-by: Andy Lee <andy.lee@suse.com>
* fix: get the feature flag in data()
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: make data logic simpler
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: put tip in info banner
Signed-off-by: Andy Lee <andy.lee@suse.com>
---------
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: show notification if there is VM pending restart
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: update based on comments
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: calculate count from vm names
Signed-off-by: Andy Lee <andy.lee@suse.com>
---------
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: add wanring message when disabling a device that haven not been detached in the backend
Signed-off-by: Jack Yu <jack.yu@suse.com>
* fix: remove unused en-us key
Signed-off-by: Jack Yu <jack.yu@suse.com>
---------
Signed-off-by: Jack Yu <jack.yu@suse.com>
* refactor: display addon name from addon.harvesterhci.io/displayName label
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: add descheduler description
Signed-off-by: Andy Lee <andy.lee@suse.com>
---------
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: add vGPU MIGConfiguration page
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: add detail page
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: add banner
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: allow editConfig when status is empty
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: remove unneeded code
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: only show disable action if MIGConfig is enabled
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: some UI flow changes
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: show configured profile in table
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: show configured profiles with requested count
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: based on review
Signed-off-by: Andy Lee <andy.lee@suse.com>
---------
Signed-off-by: Andy Lee <andy.lee@suse.com>
* feat: add l2VlanTrunkMode feature
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: remove unneeded code
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: fix edit l2vlan trunk mode edit page
Signed-off-by: Andy Lee <andy.lee@suse.com>
* fix: hide Route tab when trunk mode
Signed-off-by: Andy Lee <andy.lee@suse.com>
---------
Signed-off-by: Andy Lee <andy.lee@suse.com>
* fix: hide VM take backup action if backup target is not available
Signed-off-by: Andy Lee <andy.lee@suse.com>
* refactor: use extracted func
Signed-off-by: Andy Lee <andy.lee@suse.com>
---------
Signed-off-by: Andy Lee <andy.lee@suse.com>